Sharp Charcoal Grill IG A10EU User Manual

Plasmacluster is trademark of Sharp  
Corporation.  
Plasmacluster Ion Generator  
OPERATION MANUAL  
IG-A10EU  
Plasmacluster-Ionen-Generator  
BEDIENUNGSANLEITUNG  
Générateur d’ions Plasmacluster  
MODE D’EMPLOI  
Plasmacluster Ion Generator  
BEDIENINGSHANDLEIDING  
Read and keep this manual carefully.  
Bitte lesen Sie diese Anleitung und  
bewahren Sie sie auf.  
Veuillez lire et enregistrer ces instructions.  
Lees en bewaar deze instructies.  
Ионный генератор Plasmacluster  
РУКОВОДСТВО ПО  
Прочтите данное руководство и  
сохраните его.  
ЭКСПЛУАТАЦИИ  
Printed in China  
SHARP CORPORATION  
OSAKA, JAPAN  
TINS-A325KKRZ 09A-  
2
IG-A10EU.Eng.indd  
1
2009/07/21 15:38:29  
 
ENGLISH  
CONTENTS  
IMPORTANT SAFETY INSTRUCTIONS  
...............  
E-2  
...............................................................  
• WARNING  
E-2  
E-2  
E-2  
......................  
• CAUTIONS CONCERNING OPERATION  
......................................  
• INSTALLATION GUIDELINES  
........................................................  
.................................................................................  
E-3  
PARTS NAME  
• FRONT  
E-3  
E-3  
...................................................................................  
• BACK  
...........................................  
E-4  
E-4  
E-5  
INSTALLATION POSITION  
......................................................................  
OPERATION  
.............................  
CLEANING AND MAINTENANCE  
...........................................................................  
• MAIN UNIT  
E-5  
E-5  
.................................................................................  
• FILTER  
....  
E-6  
E-7  
E-8  
E-8  
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT  
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT  
....  
............................................................  
SPECIFICATIONS  
....................................................  
TROUBLESHOOTING  
• While IG-A10EU can inactivate and eliminate suspended viruses  
and other contaminants, it cannot create a completely sterile  
environment. SHARP does not guarantee its ability to prevent  
microbial infection.  
• To enable stable emission of high-density Plasmacluster ions,  
the Plasmacluster Ion Generating Unit mounted in IG-A10EU will  
.
need to be replaced periodically*  
* Replacement is required approximately every 2 years (17,500 hours) when operated  
24 hours a day. IG-A10EU will stop operating after about 26 months (19,000 hours) if  
the Plasmacluster Ion Generating Unit is not replaced.  
Thank you for purchasing this SHARP Plasmacluster Ion Generator. Please  
read this manual carefully before using Plasmacluster Ion Generator.  
After reading, keep the manual in a convenient location for future reference.  
E-1  
IG-A10EU.Eng.indd  
3
2009/01/27 11:12:32  
 
IMPORTANT SAFETY INSTRUCTIONS  
When using electrical appliances, basic safety precautions should be followed, including the following:  
WARNING - To reduce the risk of electrical shock, re, or injury :  
• Read all instructions before using the unit.  
• Use only a 220-240 volt outlet.  
• DO NOT use the unit if the power cord or plug is damaged, or the connection to the wall outlet  
is loosened.  
• Periodically remove dust from the plug.  
• DO NOT insert ngers or foreign objects into the air intake or air outlet.  
• Always hold the plug and never pull on the cord when removing the power plug.  
Electrical shock and/or re from a short circuit may result.  
• DO NOT remove the plug when your hands are wet.  
• DO NOT use the unit near gas appliances or replaces.  
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, a  
Sharp authorized Service Center or qualied person in order to avoid a hazard.  
• Be cautious when cleaning the unit.  
Strong corrosive cleansers may damage the exterior.  
• DO NOT use it in the areas where the unit may get wet.  
• DO NOT use spray products near the unit.  
DO NOT use in the rooms, containing oil component, incense, cigarettes’ sparks, and chemical fumes.  
• DO NOT operate when using aerosol insecticides or in rooms where there is oily residue, in-  
cense, sparks from lit cigarettes, chemical fumes in the air, or in locations where the unit may  
get wet, such as a bathroom.  
• Only a Sharp Authorized Service Center should service this Plasmacluster Ion Generator.  
Contact the nearest Service Center for any problems, adjustments, or repairs.  
• This appliance is not intended for use by persons (including children) with reduced physical,  
sensory or mental capabilities, or lack of experience and knowledge, unless they have been  
given supervision or instruction concerning use of the appliance by a person responsible for  
their safety.  
• Children should be supervised to ensure that they do not play with the appliance.  
CAUTIONS CONCERNING OPERATION:  
• DO NOT block the air intake and/or air outlet.  
• DO NOT use the unit near or on hot objects, such as stoves or heaters or where it may come  
into contact with steam.  
• Always operate the main unit in an upright position.  
• Clean the exterior with a soft cloth only, otherwise the main unit surface may be damaged or  
cracked.  
• Keep the main unit away from water.  
INSTALLATION GUIDELINES:  
• Place at least 2m away from equipment utilizing electric waves such as televisions or radios to  
avoid electrical interference when using the unit.  
• Avoid using in locations where the unit is exposed to condensation or drastic temperature  
changes. Appropriate room temperature is between 0-35ºC.  
• Avoid locations where grease or oily smoke is generated, otherwise the main unit surface may  
crack as a result.  
NOTE - Radio or TV Interference:  
If this Plasmacluster Ion Generator may cause interference to radio or television reception,  
try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the distance between the unit and radio/TV receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
E-2  
IG-A10EU.Eng.indd  
4
2009/01/27 11:12:32  
 
PARTS NAME  
FRONT  
DISPLAY  
Louvers  
(See E-4)  
Unit Replacing  
Top Cover Cap  
Screws  
(See E-6)  
(red)  
Light  
(blue)  
High  
Air outlet  
Top Cover  
Operation  
Button  
(blue)  
Low  
Plasmacluster Ion  
Generating Unit  
(See E-6,7)  
Fan Speed  
Indicator  
Filter (Air Intake)  
(See E-5)  
Filter (Air Intake)  
BACK  
Use a pointed object, e.g a pen tip, to press  
this button after replacing Plasmacluster Ion  
Generating Unit.  
Do not press it for any other purpose.  
(This is to reset the Unit Replacing Light.)  
Power Cord  
Plug  
E-3  
IG-A10EU.Eng.indd  
5
2009/07/21 13:08:50  
 
INSTALLATION POSITION  
Place the main unit on a smooth,  
DO NOT USE the below items near the unit.  
stable surface in a room and  
insert the plug into an outlet.  
silicone-containing products*  
DO NOT hold the louvers when carrying the unit.  
PESTICIDE  
SPRAY  
WAX  
Installation Guidance.  
Leave at least 15cm of clearance behind the Unit.  
UPSIDE More than 1m  
* Hair care products, cosmetic products,  
water proof sprays, polish glass cleaner,  
wipe and wax.  
BACKSIDE  
More than 15cm  
LEFT/RIGHT SIDE  
More than 20cm  
OPERATION  
Press the operation button to directly turn on the power and  
select the preferred mode.  
Release high-density  
Plasmacluster ions quietly.  
LOW  
Increase the volume of  
Plasmacluster ions to increase  
HIGH  
the purifying capacity.  
'OFF'  
Power 'OFF'.  
Louvers  
The air comes from direction, which is stamped on the  
louvers.  
•When releasing ions to the entire room, put each louver in  
an opposite direction.  
•When releasing ions to the point to deodorize the adhering  
.
odor on clothes, put both louvers in the same direction  
E-4  
IG-A10EU.Eng.indd  
6
2009/01/27 11:12:32  
 
CLEANING AND MAINTENANCE  
WARNING:  
When cleaning the unit, be sure to rst unplug the power cord,  
and never handle the plug with wet hands.  
Electrical shock and/or bodily injury may occur as a result.  
Main Unit  
Every month or more often if necessary  
Wipe with a dry soft cloth.  
<For Stubborn Dirt>  
Use water and a mild detergent. And  
rt>  
then, wipe with a wet cloth.  
Make sure to dry out the main unit.  
Filter  
Every 2 weeks or more often if necessary  
Gently remove dust from the  
filters by using a vacuum  
cleaner.  
<For Stubborn Dirt>  
Detach the filter and remove dust with  
using a vacuum cleaner.  
Filter  
Filter  
* The lter is not disposable item, often clean it.  
E-5  
IG-A10EU.Eng.indd  
7
2009/01/27 11:12:33  
 
PLASMACLUSTER ION GENERATING UNIT REPLACEMEN  
T
In order to release Plasmacluster Ion stably, periodical Plasmacluster  
Ion Generating Unit replacement is necessary. The Unit Replacing  
Light will be ON as a reminder for replacement.  
Display  
Message  
Elapsed Time  
Beginning to use  
lighting  
(blue)  
approx. 2 years  
(approx. 17,500hours)  
ashing(red)  
Suggest replacing  
lighting  
(blue)  
Stop working  
Replace the  
Plasmacluster  
Ion Generating  
Unit  
approx. 2 years and  
2 months  
(approx.19,000hours)  
ashing faster  
(red)  
Plasmacluster Ions  
are not released.  
All light are  
ashing  
Error*  
* Usage environment affects the lifetime of the Plasmacluster Ion Generator.  
The Plasmacluster Ion Generator may stop working before estimated lifetime.  
In this case, press Operation button again and restart.  
If this does not help, replace with a new Plasmacluster Ion Generating Unit.  
Replacement of Plasmacluster Ion Generating Unit  
<For Disposal>  
Plasmacluster Ion Generating Unit  
Model Number  
Please dispose the used Plasmacluster  
Ion Generating Unit according to any local  
laws and regulations.  
IZ-CA10E  
-materials-  
• Case : Polystyrene  
Unit : Polystyrene Terephthalate, Electric  
parts  
E-6  
IG-A10EU.Eng.indd  
8
2009/01/27 11:12:33  
 
HOW TO REPLACE THE PLASMACLUSTER  
ION GENERATING UNIT  
* When replacing the Plasmacluster Ion Generating Unit, be sure to turn off the  
main unit, unplug the power cord, and never handle the plug with wet hands.  
Remove the  
LOUVERS.  
1
Remove the TOP  
COVER CAP.  
2
Turn the 2 SCREWS  
3
SCREWS  
Lift up the TOP  
COVER.  
4
Replace the  
Plasmacluster Ion  
Generating Unit.  
5
* See the manual of Plasmacluster Ion  
Generating Unit for replacement.  
E-7  
IG-A10EU.Eng.indd  
9
2009/01/27 11:12:33  
 
SPECIFICATIONS  
Model  
IG-A10EU  
Power supply  
220-240V, 50/60Hz  
(Low)  
(Low)  
6.5  
72  
14.0  
102  
Power consumption (W)  
(High)  
(High)  
3
Airow volume (m /hour)  
2
Applicable oor surface area (m )*  
Power cord (m)  
10  
1.8  
Outer dimensions (mm)  
Weight (kg)  
140 160 345 (W  
2.5  
D
H)  
*The target oor surface area for which an emitted airborne ion density of about 25,000 ions/cm3 can  
be measured at a point near the center of the room (at a height of about 1.2 m from the oor), during  
operation at the HIGH mode when the main unit is placed near a wall.  
• The number of ions will vary according to the room conditions and the main unit operation mode.  
TROUBLESHOOTING  
Before calling for service, please review the TROUBLESHOOTING chart below,since the problem may  
not be Plasmacluster Ion Generator malfunctions.  
Problem  
WHAT TO DO  
Make sure to put in the plug.  
The Plasmacluster Ion Generator  
does not work.  
Approx. 2 years and 2 months (approx. 19,000  
hours) has been passed.  
Replace with a new Plasmacluster Ion  
Generating Unit. See page E-6,7.  
ashing faster  
(red)  
Plasmacluster Ions are not released.  
Press the Operation button and restart.  
If all lights keep ashing, replace with new  
Plasmacluster Ion Generating Unit. See page E-6,7.  
ashing (red)  
ashing (blue)  
Dust may block the lter, clean the lter.  
ashing (blue)  
Failure  
Unplug and contact the store you purchased or  
Sharp Service Center.  
ashing (blue)  
The discharged air has odor.  
The Plasmacluster Ion Generator releases a  
small trace of ozone which may produce odor.  
This is not harmful to health.  
A clicking or ticking sound comes  
from the unit while operating the  
Plasmacluster Ion Generator.  
Loudness can be changed depending on a room  
humidity, but the effectiveness is the same.  
Relocate the Plasmacluster Ion Generator if  
necessary.  
E-8  
IG-A10EU.Eng.indd 10  
2009/06/17 10:37:19  
 
A. Information on Disposal for Users (private households)  
1. In the European Union  
Attention: If you want to dispose of this equipment, please do not use the ordinary dust  
bin!  
Used electrical and electronic equipment must be treated separately and in  
accordance with legislation that requires proper treatment, recovery and recycling of  
used electrical and electronic equipment.  
Following the implementation by member states, private households within the EU  
states may return their used electrical and electronic equipment to designated  
collection facilities free of charge*. In some countries* your local retailer may also  
take back your old product free of charge if you purchase a similar new one.  
*) Please contact your local authority for further details.  
Attention: Your product is  
marked with this symbol. It  
means that used electrical  
and electronic products  
should not be mixed with  
general household waste.  
There is a separate  
collection system for these  
products.  
If your used electrical or electronic equipment has batteries or accumulators, please  
dispose of these separately beforehand according to local requirements.  
By disposing of this product correctly you will help ensure that the waste undergoes  
the necessary treatment, recovery and recycling and thus prevent potential negative  
effects on the environment and human health which could otherwise arise due to  
inappropriate waste handling.  
2. In other Countries outside the EU  
If you wish to discard this product, please contact your local authorities and ask for the  
correct method of disposal.  
For Switzerland: Used electrical or electronic equipment can be returned free of  
charge to the dealer, even if you don’t purchase a new product. Further collection  
facilities are listed on the homepage of www.swico.ch or www.sens.ch.  
B. Information on Disposal for Business Users.  
1. In the European Union  
If the product is used for business purposes and you want to discard it:  
Please contact your SHARP dealer who will inform you about the take-back of the  
product. You might be charged for the costs arising from take-back and recycling.  
Small products (and small amounts) might be taken back by your local collection  
facilities.  
For Spain: Please contact the established collection system or your local authority for  
take-back of your used products.  
2. In other Countries outside the EU  
If you wish to discard of this product, please contact your local authorities and ask for  
the correct method of disposal.  
EN  
IG-A10EU.Eng.indd 11  
2009/01/27 11:12:34  
 

Sharp All in One Printer AR 235 User Manual
Sharp PDAs Smartphones OZ 290HII User Manual
Silicon Power Computer comm Switch 74669003 User Manual
Sony Car Stereo System 757MX User Manual
Sony DVD VCR Combo DIGITAL8 User Manual
Sony DVD VCR Combo RDR VX560 User Manual
State Industries Water Heater Gas Fired Water Heaters User Manual
StreamLight Home Safety Product 700025 User Manual
Sub Zero Refrigerator BI 36UG F User Manual
Sunbeam Electric Heater SLP3300 CN User Manual