USER’S MANUAL
9.45ST MOTORIZED TREADMILL
USER WEIGHT LIMITATION: 400lbs(182kgs).
SERIAL NUMBER (found on frame):
3
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and
noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of
treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 110VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric
current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing
below.
GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers
may cause this equipment to function improperly.
4
9.45ST TREADMILL
BEFORE YOU BEGIN
Open the boxes:
Open the boxes of your new equipment. Inventory all parts included in the boxes, and compare them to the Supplied
Components and Supplied Hardware lists on pages 5-6 for a full count of the parts included. If you are missing any
parts or have any questions contact us directly at 888-800-1167
*Assembly instructions are on pages 18-26.
Gather your tools:
Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit
properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is
free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a
comfortable amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another
person when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 400LBS (Approx. 182 Kgs). It is
not recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown
here. This product is not intended to support users whose weight exceeds this limit.
Care and maintenance:
The safety level can be maintained only if it is examined for damage and wear.
Replace any defective components immediately and stop all use of the equipment until repaired.
Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails.
Dismount from the equipment only after all parts have stopped.
Always check the wear and tear components like pulley, belts, etc.…To prevent injury.
There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately
by actuating the emergency stop for emergency dismount.
5
SUPPLIED COMPONENTS
This list identifies the major components you will use to assemble this product.
No.
A
B
C
D
E
F
Description
Qty.
1
A
B
Computer
Front Handlebar Assembly
Handlebar
1
2
Upright Assembly Left
Upright Assembly Right
Main Frame Assembly
Chest Belt
1
1
C
D
E
F
1
G
F
1
Power Cord
1
I
Running belt Lubrication
1
310 Adjustable Cylinder
2
303 Upright Cover - LL
1
H
I
304 Upright Cover - LR
1
G
305 Upright Cover - RL
1
306 Upright Cover - RR
1
311 Upright Plastic Shroud - LL
312 Upright Plastic Shroud - LR
313 Upright Plastic Shroud - RL
314 Upright Plastic Shroud - RR
1
310
303
306
304
305
1
1
1
Adjustable Cylinder Cover -
Upper
315
2
311
312
314
313
315
107 Safety Key
116 Water Bottle
2
1
107
116
6
9.45ST TREADMILL
SUPPLIED HARDWARE
This list identifies the hardware you will use to assemble the product. To help distinguish between
the various types of screws and bolts, use the scale below to measure them and compare them to
the sizes listed.
No.
Description
Qty.
2
804
M8 × 15mm Bolt
805
806
804
807
805 M8 × 50mm Bolt
12
18
806 # 8 × 20mm Screw
4 × 15mm Thread Cutting
Screw
807
19
846
845
843
826
826 M8 Nylon Nut
2
4
2
2
1
1
1
1
1
1
843 M8 × 15 mm Allen Head Bolt
845 13 × 42mm Shaft
B
D
A
C
E
846 #8 × 23mm Washer
A
B
C
D
E
F
5mm Allen Key
8mm Allen Key
Screwdriver
5mm Allen Wrench
Spanner
6mm Allen Wrench
F
MILLIMETERS
7
COMPLETE PARTS LIST
Item No.
Description
Qty.
Part No.
Complete Computer Console
Overlay
9.45ST-100
101
1
9.45ST-101
9.45ST-102
9.45ST-103
9.45ST-104
9.45ST-105
9.45ST-106
9.45ST-107
9.45ST-108
9.45ST-109
9.45ST-110
9.45ST-111
9.45ST-112
9.45ST-113
9.45ST-114
9.45ST-115
9.45ST-116
Computer Insert
102
1
1
1
1
1
1
1
1
1
2
1
1
1
2
2
Console PC Board
103
Console Housing – Upper
Console Housing – Bottom
Safety Key Base
104
105
106
Safety Key
107
Safety Key Wire – Upper
Computer Wire – Upper
Computer Ground Wire
Hand Pulse Wire – Upper
E – Prom
108
109
110
111
112
Motion Control Board
Motion Control Board Wire
Motion Control Sensor Wire
Water Bottle Holder
113
114
115
116
Complete Handle Bar Components
Handle Bar Upright
9.45ST-200
201
2
2
1
1
2
2
2
2
9.45ST-201
9.45ST-202
9.45ST-203
9.45ST-204
9.45ST-205
9.45ST-206
9.45ST-207
9.45ST-208
Handle Bar Upright Foam Grip
Front Handle Bar
202
203
Front Handle Bar Foam Grip-Short
Front Handle Bar Foam Grip-Long
Hand Pulse Set
204
205
206
Motion Control
207
Motion Control Base
Complete Upright Components
Upright
208
9.45ST-300
301
2
1
1
1
1
1
1
2
9.45ST-301
9.45ST-303
9.45ST-304
9.45ST-305
9.45ST-306
9.45ST-307
9.45ST-308
9.45ST-309
Upright Cover-LL
303
Upright Cover-LR
304
Upright Cover-RL
305
Upright Cover-RR
306
Safety Key Wire – Middle
Computer Wire – Upper
Motion Control Sensor Wire - Middle
307
308
309
8
9.45ST TREADMILL
COMPLETE PARTS LIST
Item No.
Description
Qty.
Part No.
Adjustable Cylinder
Upright Plastic Shroud – LL
Upright Plastic Shroud – LR
Upright Plastic Shroud – RL
Upright Plastic Shroud – RR
Adjustable Cylinder Cover - Upper
Fixing Inserts
310
311
312
313
314
315
318
2
9.45ST-310
9.45ST-311
9.45ST-312
9.45ST-313
9.45ST-314
9.45ST-315
9.45ST-316
1
1
1
1
2
2
Complete Base Frame Components
Base Frame
9.45ST-400
401
1
1
1
1
1
1
1
4
2
2
2
2
2
2
1
9.45ST-401
9.45ST-402
9.45ST-403
9.45ST-404
9.45ST-405
9.45ST-406
9.45ST-407
9.45ST-411
9.45ST-412
9.45ST-413
9.45ST-414
9.45ST-415
9.45ST-416
9.45ST-417
9.45ST-426
Safety Key Wire – Lower
Computer Wire –Lower
Power Switch Plate Cover
Power Switch Plate
Power Breaker
402
403
404
405
406
Power Switch
407
Bushing
411
Fix Bolt Sets
412
Front Caster
413
Rubber Cushion
414
Level Adjuster
415
Base Frame End Cap
Cushion
416
417
Shock
426
Complete Motor Components
Motor Hood
9.45ST-500
501
1
1
1
1
1
1
1
1
9.45ST-501
9.45ST-502
9.45ST-503
9.45ST-504
9.45ST-505
9.45ST-506
9.45ST-507
9.45ST-508
Elevation Motor
502
Elevation Gear Sleeve
Driving Motor
503
504
Motor Holder
505
Driving Belt
506
Motor Control Board
Elevation Control Board
507
508
9
COMPLETE PARTS LIST
Item No.
Description
Qty.
Part No.
Elevation Support Tube
09
1
1
1
1
2
2
2
2
1
1
1
9.45ST-509
9.45ST-510
9.45ST-511
9.45ST-512
9.45ST-513
9.45ST-514
9.45ST-515
9.45ST-516
9.45ST-517
9.45ST-518
9.45ST-519
Elevation Support Tube Cover - LEFT
510
511
512
513
514
515
516
517
518
519
Motor Bottom Cover
Deck Frame Side Cover - LEFT
Plastic Clamp - TOP
Plastic Clamp - BOTTOM
Elevation Support
Deck Rubber Cushion
Rear Vent Cover
Elevation Support Tube Cover - RIGHT
Deck Frame Side Cover – RIGHT
Complete Running Deck Components
Running Belt
9.45ST-600
601
1
2
1
1
1
9.45ST-601
9.45ST-602
9.45ST-603
9.45ST-604
9.45ST-605
Side Rail
602
Running Deck
603
Side Rail End Cap - LEFT
Side Rail End Cap - RIGHT
Complete Deck Frame Components
Deck Frame
604
605
9.45ST-700
701
1
1
1
4
1
1
1
1
1
2
9.45ST-701
9.45ST-702
9.45ST-703
9.45ST-704
9.45ST-705
9.45ST-706
9.45ST-707
9.45ST-708
9.45ST-709
9.45ST-413
Front Roller Shaft
702
Front Roller Tube
703
704
Roller Bearing 6202
705
706
707
708
709
413
Rear Roller Shaft
Rear Roller Tube
Running Deck Support Tube
Deck Frame – Rear
Steady Frame
Rear Caster
Complete Hardware Pack
＃6 × 12mm Screws
M4 × 6mm Screws
9.45ST-800
801
10
12
8
9.45ST-801
9.45ST-802
9.45ST-803
802
803
M8 × 12mm Screws
10
9.45ST TREADMILL
COMPLETE PARTS LIST
Item No.
Description
Qty.
Part No.
804
805
806
807
808
809
813
814
816
817
818
819
820
821
822
823
824
825
826
M8 × 15mm Bolt
M8 × 50mm Bolt
# 8 × 20mm Screw
4 × 15mm Thread Cutting Screw
M5 × 10mm Screws
M8 × 16 Screws
Washer
3
12
20
19
2
9.45ST-804
9.45ST-805
9.45ST-806
9.45ST-807
9.45ST-808
9.45ST-809
9.45ST-813
9.45ST-814
9.45ST-816
9.45ST-817
9.45ST-818
9.45ST-819
9.45ST-820
9.45ST-821
9.45ST-822
9.45ST-823
9.45ST-824
9.45ST-825
9.45ST-826
9.45ST-827
9.45ST-828
9.45ST-829
9.45ST-830
9.45ST-832
9.45ST-833
9.45ST-834
9.45ST-838
9.45ST-839
9.45ST-840
9.45ST-841
9.45ST-842
9.45ST-843
9.45ST-845
9.45ST-846
20
4
Nylon Nut
6
M14 × 90 Screws
Bearing
3
4
M10 × 35mm Screws
M8 × 10mm Screws
M8 × 50mm Screws
M10 × 63mm Bolts
Fixed Block
10
7
2
1
8
M8 × 120mm Bolts
Plate Washer
1
2
Spring
1
M8 Nylon Nut
2
M8 × 20mm Screws
Spring Washer
827
828
829
830
832
833
834
838
839
840
841
842
843
845
846
6
12
2
Washer
M10 × 136mm Screws
M8 × 25mm Screws
Hexagon Nut
1
8
10
3
M6 × 70mm Bolts
M10 × 43mm Bolts
Cushion Pad
2
10
1
M10 × 40mm Screws
M6 × 10mm Screws
M10 × 30mm Allen Head Bolt
M8 × 15mm Allen Head Bolt
13 × 42mm Shaft
#8 × 23mm Washer
2
2
4
2
2
12
9.45ST TREADMILL
PARTS DIAGRAM
MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.
13
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
|