Transition Networks TV Converter Box F SM MM 06 User Manual

USER’S GUIDE  
F-SM-MM-06  
Stand-Alone Media Converter  
• OC-12 ATM / SONET  
• Singlemode to Multimode  
Transition Networks F-SM-MM-06  
Ethernet Media Converter extends ATM or  
SONET over singlemode fiber-optic cable  
up to 40 km.  
Part Number  
Port One - Fiber-Optic Port Two - Fiber-Optic  
SC, 1300 nm multimode SC, 1310 nm singlemode  
2 km (1.2 miles)* 15 km (9.3 miles)*  
F-SM-MM-06(XL) SC, 1300 nm multimode SC ,1310 nm singlemode  
2 km (1.2 miles)* 40 km (24.9 miles)*  
F-SM-MM-06  
* Typical maximum cable distance. Actual distance is dependent upon the  
physical characteristics of the network. See the Cable Specifications on page 4  
for more information on the cable length.  
Optional Accessories (sold separately)  
Part Number Description  
SPS-1872-SA Optional External Power Supply; 18-72VDC Stand-Alone  
Output: 12.6VDC, 1.0 A  
SPS-1872-CC Optional External Power Supply; 18-72VDC Piggy-back;  
Output: 12.6VDC, 1.0 A  
E-MCR-03  
WMBL  
12-Slot Media Converter Rack (includes universal internal power  
supply) 17 x 15 x 5 in. (432 x 381 x 127 mm)  
Optional Wall Mount Brackets  
Length: 4.0 in. (102 mm), Fits converter length: 4.7 in. (119 mm)  
WMBV  
Optional Vertical Mount Bracket; Length: 5.0 in. (127 mm)  
WMBD  
WMBD-F  
Optional DIN Rail Mount Bracket; Length: 5.0 in. (127 mm)  
Optional DIN Rail Mount Bracket (flat); Length: 3.3in. (84 mm)  
Installation . . . . . . . . . . . . . . . . . .2  
Operation . . . . . . . . . . . . . . . . . . .3  
Cable Specifications . . . . . . . . . . .4  
Technical Specifications . . . . . . . .5  
Fault Isolation and Correction . . .6  
Contact Us . . . . . . . . . . . . . . . . . .7  
Compliance Information . . . . . . . .8  
 
F-SM-MM-06  
CABLE SPECIFICATIONS  
TECHNICAL SPECIFICATIONS  
The physical characteristics must meet or exceed ANSI TI.646-1995, ITU G.957  
specifications.  
For use with Transition Networks Model F-SM-MM-06 or equivalent  
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR,  
Subchapter J applicable at the date of manufacture.  
-10  
Bit Error Rate:  
<10  
Multimode  
1300 nm  
Standards:  
ANSI TI.646-1995, ITU G.957  
622 Mb/s  
Recommended:  
Optional:  
62.5/125 µm  
100/140, 85/125, 50/125 µm  
Data Rate:  
Case Dimensions:  
Weight:  
4.7" x 3.0" x 1.0" (119 mm x 76 mm x 25 mm)  
10 oz. (283 g) (approximate)  
3.1 W  
Fiber Optic Transmitter Power:  
Fiber Optic Receiver Sensitivity:  
Link Budget:  
min: -19.0 dBm max: -14.0 dBm  
min: -26.0 dBm max: -14.0 dBm  
7.0 dB  
Power Consumption:  
Minimum cable distance*  
Typical maximum cable distance* 2 km (1.2 miles)  
2 meters (6.6 ft)  
Power Supply  
DC Output:  
12VDC, 0.4 A (minimum)  
minimum output regulation: 5%  
Connector: 2.1mm barrel, center pin positive  
Singlemode  
MTBF  
51,185 hours (MIL217F2 V5.0) (MIL-HDBK-217F)  
Recommended:  
9 µm  
124,339 hours (Bellcore7 V5.0)  
F-SM-MM-06  
1310 nm  
Environment:  
Tmra*:  
0 to 50°C (32 to 122°F)  
-20 to 85°C (-4 to 185°F)  
10 to 90%, non condensing  
0 to 10,000 feet  
Fiber Optic Transmitter Power:  
Fiber Optic Receiver Sensitivity:  
Link Budget:  
min: -15.0 dBm max: -8.0 dBm  
min: -28.0 dBm max: -7.0 dBm  
13.0 dB  
Storage Temp:  
Humidity:  
Altitude:  
Minimum cable distance*  
Typical maximum cable distance* 15 km (9.3 miles)  
2 meters (6.6 ft)  
Warranty:  
Lifetime  
*Manufacturer’s rated ambient temperature.  
F-SM-MM-06(XL)  
1310 nm  
min: -3.0 dBm  
min: -29.0 dBm max: -7.0 dBm  
26.0 dB  
2 meters (6.6 ft)  
CAUTION: Visible and Invisible Laser Radiation When Open. Do Not Stare  
Into Beam Or View Directly With Optical Instruments.  
Fiber Optic Transmitter Power:  
Fiber Optic Receiver Sensitivity:  
Link Budget:  
Minimum cable distance*  
Typical maximum cable distance* 40 km (24.9 miles)  
max: +2.0 dBm  
CAUTION: Use of controls, adjustments or the performance of procedures  
other than those specified herein may result in hazardous radiation exposure.  
* Actual distance is dependent upon the characteristics of the network  
installation.  
Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)  
[email protected] -- Select the “Transition Now” Link for a Live Web Chat  
4
5
 
F-SM-MM-06  
FAULT ISOLATION and CORRECTION  
If the Media Converter fails, isolate and correct the failure by determining the  
answers to the following questions and then taking the indicated action:  
CONTACT US  
Technical Support  
Technical support is avialable 7:00 AM - 6:00 PM CST (GMT -6:00)  
1.  
Is the PWR LED on the Media Converter illuminated?  
NO  
US and Canada:  
International:  
1-800-260-1312  
00-1-952-941-7600  
Is the power adapter the proper type of voltage and cycle frequency  
for the AC outlet?  
Is the power adapter properly installed in the Media Converter and in  
the outlet?  
Contact Technical Support: US/Canada: 1-800-260-1312,  
International: 00-1-952-941-7600.  
Transition Now  
Chat live via the Web with Transition Networks Technical Support.  
Log onto www.transition.com and click the Transition Now link.  
Web-Based Seminars  
Transition Networks provides seminars via live web-based training.  
Log onto www.transition.com and click the Learning Center link.  
YES  
Proceed to step 2.  
2.  
Is the multimode Link LED (on the left) illuminated?  
NO  
E-Mail  
Ask a question anytime by sending an e-mail to our technical support staff.  
Check the fiber cables for proper connection.  
Verify that the TX and RX cables on the Media Converter are  
connected to the RX and TX ports, respectively, on the other device.  
Contact Technical Support: US/Canada: 1-800-260-1312,  
International: 00-1-952-941-7600.  
Address  
Transition Networks  
6475 City West Parkway  
Minneapolis, MN 55344, USA  
telephone:  
toll free:  
fax:  
YES  
952-941-7600  
800-526-9267  
952-941-2322  
Proceed to step 3.  
3.  
Is the singlemode Link LED (on the right) illuminated?  
NO  
Check the fiber cables for proper connection.  
Verify that the TX and RX cables on the Media Converter are  
connected to the RX and TX ports, respectively, on the other device.  
Contact Technical Support: US/Canada: 1-800-260-1312,  
International: 00-1-952-941-7600.  
YES  
Contact Technical Support: US/Canada: 1-800-260-1312,  
International: 00-1-952-941-7600.  
DECLARATION OF CONFORMITY  
Name of Mfg:  
Transition Networks  
6475 City West Parkway, Minneapolis MN 55344 USA  
Model:  
Part Number(s):  
Regulation:  
F-SM-MM-06 Series Media Converters  
F-SM-MM-06, F-SM-MM-06(XL)  
EMC Directive 89/336/EEC  
Purpose: To declare that the F-SM-MM-06 to which this declaration refers is in  
conformity with the following standards.  
EMC-CISPR 22: 1985 Class A; EN 55022: 1988 Class A; EN 50082-1:1992;  
EN 60950 A4:1997; IEC 801.2, 801.3, 801.4; IEC 950; 21 CFR subpart J  
I, the undersigned, hereby declare that the equipment specified above conforms to the above  
Directive(s) and Standard(s).  
January 1, 1997  
Stephen Anderson, Vice-President of Engineering  
Date  
Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)  
[email protected] -- Select the “Transition Now” Link for a Live Web Chat  
6
7
 
COMPLIANCE INFORMATION  
UL Listed  
C-UL Listed (Canada)  
CISPR22/EN55022 Class A  
CE Mark  
FCC Regulations  
This equipment has been tested and found to comply with the limits for a class A digital  
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable  
protection against harmful interference when the equipment is operated in a commercial  
environment. This equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instruction manual, may cause harmful  
interference to radio communications. Operation of this equipment in a residential area is  
likely to cause harmful interference, in which case the user will be required to correct the  
interference at the user's own expense.  
Canadian Regulations  
This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus  
set out on the radio interference regulations of the Canadian Department of Communications.  
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites  
applicables aux appareils numériques de la class A prescrites dans le Règlement sur le  
brouillage radioélectrique édicté par le ministère des Communications du Canada.  
European Regulations  
Warning  
This is a Class A product. In a domestic environment this product may cause radio  
interference in which case the user may be required to take adequate measures.  
Achtung !  
Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb  
dieses Gerätes Rundfunkstörungen auftreten, in weichen Fällen der Benutzer für  
entsprechende Gegenmaßnahmen werantwortlich ist.  
Attention !  
Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer  
des interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures  
spécifiques appropriées.  
Trademark Notice  
All trademarks and registered trademarks are the property of their respective owners.  
Copyright Restrictions  
© 1997 - 2003 Transition Networks.  
All rights reserved. No part of this work may be reproduced or used in any form or by any  
means - graphic, electronic, or mechanical - without written permission from Transition  
Networks.  
Printed in the U.S.A.  
33055.C  
 

Texas Instruments Computer Hardware TMS320DM646X DMSOC User Manual
Texas Instruments Stereo Amplifier SLOU023A User Manual
Topcom Network Router WBR 254G User Manual
Toshiba CRT Television 32A62 User Manual
Trane Air Conditioner RTAC 140 400 ton units 50 HZ User Manual
Tripp Lite Network Cables N002 005 BL User Manual
Vantec Personal Computer VAF 1225 User Manual
Video Products Computer Hardware SM 4X2 HDMI LC User Manual
Waves Stereo Receiver MX5000 User Manual
Weed Eater Lawn Mower 174193 User Manual