AllerAir Air Cleaner AR 2000 User Manual

AR 2000 and AR 4000  
Dual Purpose Air Rhino Units  
and
Filter Change Directions  
Filter Replacement Directions  
Warning: Before opening unit for any reason unplug the unit  
The Pre-filter (part #AWFP2424)  
Should be changed daily in an industrial application and as needed in a light applicati  
Unsnap the door latches and open the door.  
ƒ
ƒ
Remove the used pre-filter and replace with a new pre-filter  
Close the door and relatch the snaps  
ƒ
ƒ
See diagram on reverse  
-
The Dust Filter (part #AWFD2424)  
ƒ
Should be changed every 2 to 3 days in an industrial application and as needed in a ligh  
application  
ƒ
ƒ
ƒ
Unsnap the door latches and open the door.  
Remove the used Dust filter and replace with a new pre-filter  
Close the door and relatch the snaps  
See diagram on reverse  
The HEPA Filter (part #AWHF0411)  
Note: May be equiped with AWCF0314 carbon filter.  
Should be changed when the gauge reads: and above 1.7 or when the light comes on depending  
on how unit is equiped.  
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Unsnap the door latches and open the door.  
-
Remove the prefilter, wire-frame filter and carbon filter if supplied.  
Loosen wing nuts and remove the HEPA filter  
Reverse the above procedure to replace the HEPA filter  
Dispose of used filters according to local environmental regulations  
See diagram on reverse  
The Carbon Filter (part #AWCF0500) Canister Only  
ƒ
Should be changed as required - Life of the carbon depends on what and how much product  
it is adsorbing. The only way to know carbon has reached its capacity is when it starts to off gas.  
Record the first time it starts to off gas and schedule to change the carbon one or two months  
before. You have created your schedule.  
ƒ
Unsnap the door latches and open the door.  
ƒ
ƒ
ƒ
ƒ
Remove the pre-filter and the wire-frame filter  
Loosen wing nuts and remove the HEPA filter  
Reverse the above procedure to replace the HEPA filter  
Dispose of used filters according to local environmental regulations  
For maximum performance it is very important to change filters as  
specified in these directions  
Trouble Shooting Guide  
Symptoms  
Possible Cause  
Suggested Solution  
ƒ
Faulty power supply  
Return or supply grill blocked  
Blown fuse  
Unit not plugged in  
Obstruction in system  
Clogged filters  
Check breaker box  
Remove obstruction  
Replace fuse  
Plug in unit  
Remove obstruction  
Replace filters  
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Unit will not start  
ƒ
ƒ
ƒ
ƒ
ƒ
Insufficient air flow  
Excessive airflow  
ƒ
Filters not in place  
ƒ
Install filt  
ers  
 

3M Tablet Accessory 40800 User Manual
321 Studios Gas Grill MFX C2828 User Manual
Acer Projector PD116PD User Manual
Aero Housewares TV Cables GR900 Series User Manual
Air King Ventilation Hood SEV24SSH User Manual
Allied Telesis Network Router 86222 10 User Manual
Alpine Car Stereo System TDM 7544 User Manual
Avocent Server ACS 5000 User Manual
Axis Communications Security Camera M3007P User Manual
Azden Headphones 200R User Manual