Gigabyte Network Card GV N57128DE User Manual

GV-N57128DE/  
GV-N57256DE/  
GV-N57256V  
GeForceFX 5700 Graphics Accelerator  
User's Manual  
Rev. 101  
12MD-N57256V-101  
Copyright  
© 2003 GIGABYTETECHNOLOGYCO., LTD  
CopyrightbyGIGA-BYTETECHNOLOGY CO., LTD. ("GBT"). No partofthis manual may be reproduced or transmitted in  
anyfrom withoutthe expressed, written permission ofGBT.  
Trademarks  
Third-partybrands and names are the propertyoftheir respective owners.  
Notice  
Please do not remove anylabelson VGAcard, this mayvoid the warrantyof this motherboard.  
Due to rapid change in technology, some ofthe specifications mightbe out ofdate before publication of thisbooklet.  
The authorassumes noresponsibilityforanyerrorsoromissionsthat mayappearin this documentnordoesthe authormake  
a commitmentto update the information contained herein.  
 
1. Introduction  
1.1. Features  
Powered by nVIDIA GeForce FX 5700 Graphics Processing Unit (GPU)  
Supports the new AGP 8X standard  
Integrated with 128MB DDR memory(For GV-N57128DE only)  
Integrated with 256MB DDR memory(For GV-N57256DE/GV-N57256V only)  
Supports D-Sub and DVI-I connectors  
Supports TV-Out connectors(For GV-N57128DE/GV-N57256DE only)  
Supports video capture for video editing (VIVO)(For GV-N57256V only)  
Supports Direct X 9.0 Spec  
1.2. Minimum system requirement  
IBM® or 100% PC compatible with Pentium® III650MHz or AMDAthlon 650MHz  
class processor or higher  
One availableAGP3.0 compliant slot or better  
Operating Systems Win® 98/98SE / Win® 2000 / Win® ME / Win® XP  
64MB system memory  
50MB of available disk space for full installation  
CD-ROM or DVD-ROM drive  
- 3 -  
Introduction  
 
2. Hardware Installation  
2.1. Unpacking  
The GV-N57 Seriespackage contains the following:  
The GV-N57128DE or GV-N57256DE or GV-N57256V graphics accelerator  
GV-N57 Series user's manual  
NVIDIA Series driver and utility CD  
Power DVD CD  
Game CD  
DVI-I to D-Sub connector  
TV-Out cable x 1(For GV-N57128DE/GV-N57256DE only)  
S-video and AV in/output cable x1 (For GV-N57256V only)  
Power Director CD (For GV-N57256V only)  
Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect  
them againstdamage from static electricity, you should follow some precautions  
whenever you work on your computer.  
1. Turn offyour computer and unplug power supply.  
2. Use a grounded wrist strap before handling computer components. Ifyou do nothave one,  
touch both of your hands to a safelygrounded object or to a metal object, such as the power  
supply case.  
3. Place components on a grounded antistatic pad or on the bag that came with the  
components whenever the components are separated from the system.  
The card contains sensitive electric components, which can be easily damaged by static  
electricity, so the card should be left in its original packing until it is installed.  
Unpacking and installation should be done on a grounded anti-static mat. The operator should  
be wearing an anti-static wristband, grounded atthe same point as the anti-static mat.  
Inspect the card carton for obvious damage. Shipping and handling may cause damage to  
your card. Be sure there are no shipping and handling damages on the card before proceeding.  
DO NOT APPLYPOWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON THE CARD.  
Inorder toensureyour graphics card working correctly,please use official Gigabyte  
BIOS only. Use none official gigabyte BIOS might cause problem on the graphics  
card.  
- 4 -  
 
GV-N57 SeriesGraphicsAccelerator  
2.2. Board layout  
1) GV-N57128DE  
VGA Monitor Connector  
(15pin)  
S-Video  
DVI-I Connector  
2) GV-N57256DE  
VGA Monitor Connector  
(15pin)  
S-Video  
DVI-I Connector  
OR  
VGA Output  
Analog Monitor  
Analog LC D M onitor  
VGA Monitor  
C onnector  
(15pin)  
AV Output  
NTSC / PAL TV  
S-Video  
S-VideoOutput  
DVI Output  
Projector  
DVI Connector  
Digital LCD M onitor  
DVI-I to D-Sub Connector  
VGA Output  
Analog LC D M onitor  
- 5 -  
Hardware Installation  
 
3) GV-N57256V  
VGA Monitor Connector  
(15pin)  
VIVO  
DVI-I Connector  
OR  
VGA Output  
Analog LCD Monitor  
Analog Monitor  
VGA Monitor  
C onnector  
(15pin)  
S-Video Input  
AV Input  
NTSC / PAL TV  
Projector  
VIVO  
AV Output  
S-Video Output  
DVI Output  
DVI Connector  
Digital LCD M onitor  
OR  
DVI-I to D-sub  
C onnector  
VGA Output  
Analog LC D M onitor  
- 6 -  
 
GV-N57 SeriesGraphicsAccelerator