INSTALLATION INSTRUCTIONS KK-K9-D14-K
K-9 TRANSPORTATION SYSTEM
1997-2003 DODGE DURANGO
TOOLS REQUIRED:
Power Drill
Standard And Metric Socket Sets
6” Extension
Drill Bits – 1/8” Through 3/8”
Phillips Screwdriver
Wire Cutters and Crimping Tool
Ratcheting Wrench
7/16” Wrench
HARDWARE: (some hardware included in assembly)
QTY: DESCRIPTION:
PART #:
10
70
96
30
15
26
24
6
2
2
2
2
4
4
4
4
4
1
#10 X ½” Stainless Phillips Flat Head Screw
1/4-20 X ½” Stainless Carriage Bolt
1/4-20 Serrated Nut
#10 X 1/2 Stainless Phillips Screw
#10 X 3/4 Stainless Phillips Screw
1/4-20 X ¾” Stainless Carriage Bolt
#12 X ¾” Stainless Phillips Screw
¼” X 1 ¼” Hex Head Lag bolt
3/8” X 1 ½” Hex Head Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8” Hex Nut
3/8” X ½” Flat Washer
Rubber Feet
8-32 Keps Nut
8-32 X 1” Pem Stud
8-32 X 1” Phillips Machine Screws
Tube of Silver Silicone
GSM34150
GSM32022
GSM30023
GSM34169
GSM34170
GSM32024
GSM34177
GSM33061
GSM33030
GSM31007
GSM31028
GSM30008
GSM31021
PRM97609
GSM30027
GSM32252
GSM33112
PRM97343
COMPONENTS:
1
1
1
1
1
1
1
1
K-9 Main Housing
Dome Light Kit
Rubber Mat
Front Mounting Adjustable Legs
Set Of Tunnel Assemblies
Set Of Hinged Window Guards
Set Of Aluminum Door Panels
Rubber Edge Molding
SUB ASSEMBLIES:
• Attach dome light with wire to housing ceiling.
• Install rubber edge molding on edges of tunnels
INSTALL CEILING AND WALLS:
• Install ceiling with ¼-20 x ½” carriage bolts and serrated
nuts.
• Install front wall with ¼-20 x ½” carriage bolts
• Install rear wall of K-9 unit with ¼-20 x ½” carriage bolts.
INSTALL TUNNELS & DOORS:
• Loosely attach side tunnels to main housing 1/4-20 x ½”
carriage bolts or 1/4-20 x ¾”carriage bolts depending on
location.
• Attach step to tunnel.
MAIN HOUSING FINAL STEPS:
• Mount rear housing use ¼-20 x 1-½” lag bolts.
• Tighten all loose bolts in the assembly.
Note: Look under the vehicle & insure there are no obstructions.
OPTIONAL FAN: If optional fan has been purchased, install at this time.
• Mount dome light switch as desired. A switch box is provided so switch can be mounted to K9
housing in various locations. (side of tunnel housing at top works very well). Wire to 12 volt
power source.
• Sheet metal seams and gaps need to be carefully silicone at floor area. (proper sealing of
compartment will eliminate water from getting under K-9 unit)
• Allow silicone to dry overnight before placing in rubber floor
mat.
KK-K9-D14-K-INST-4-05
3
|
Graco Marine Sanitation System 204490 User Manual
Graco Model Vehicle GS35 User Manual
Graco Network Router 312353B User Manual
Grizzly Drill G9909 User Manual
Grizzly Marine Safety Devices T10722 User Manual
Hamilton Beach Mixer 840117600 User Manual
Harbor Freight Tools Grinder 90976 User Manual
Havis Shields Automobile Parts C TM GMC User Manual
Honeywell Dehumidifier H46C User Manual
IBM Computer Drive 09N4076 User Manual