Hubbell Industrial Controls, Inc.
Fixed
Transmitter
Hubbell Radio Remote Control Systems
Spec Sheet 31.350 • May 2000 • New
Replaces Spec Sheet 31120 of June 96
The Hubbell Fixed Transmitter is a microcon-
troller transmitter for use with Hubbell micro-
controller receivers. The fixed transmitter com-
municates to the remote receiver via radio
transmission, eliminating the need for festoon-
ing, cabling, etc.
The Fixed Transmitter is housed in a
NEMA 12 surface-mounting console integrat-
ing several Hubbell operator interface prod-
ucts. The transmitter electronics are essentially
the same as used in the mid-size transmitter.
Internal power supplies are provided for oper-
ation from 120V ac or 250V dc. The antenna
mounts remotely and is conected to the trans-
mitter by coax cable.
Multispeed/bidirectional operator control can
be via a Type 4211 Mini-Master Switch for
each function controlled by the transmitter. The
compact Mini-Master Switch has an operator
head molded with tough fiberglass reinforced
polyester resin and a stainless steel handle.
The switch is available with up to 5 speed
points per direction. Refer to Specification
Sheet 4211 for additional information.
Other operator interface functions (start/stop,
horn, etc.) use toggle switches, and/or push-
buttons & selector switches. Fixed transmitter
consoles are custom designed to meet the us-
er’s specific requirements.
HUBBELL
|
Greenheck Fan Ventilation Hood SE1 User Manual
Grizzly Air Compressor H3370 H3371 User Manual
Haier Washer Dryer HW80 1279 User Manual
Harbor Freight Tools Welding System 95951 User Manual
Hotpoint Double Oven UY46X 2 UH53 User Manual
Hotpoint Refrigerator CTX18GACAA User Manual
Hotpoint Washer WMF740 G A K User Manual
HP Hewlett Packard Switch 12076A LAN 1000 LINK User Manual
Husqvarna Trimmer 323HE3 User Manual
Hyundai Car Video System L91A User Manual